Makita Gv7000c: Pros And Cons, Common Issues, And Best Places To Purchase

Makita GV7000C Information

The Makita GV7000C is a 7-inch vertical disc sander that is designed for fast, efficient sanding of a variety of materials. It features a lightweight design (4.4 lbs) and variable speed control (2,500-4,700 RPM) to match the speed to the application. The sander also has a soft start feature that gradually brings the tool to speed, reducing the risk of kickback.

Specifications

Feature	Spec
Motor	900W
Sanding disc size	7 inches
No-load speed	2,500-4,700 RPM
Variable speed control	Yes
Soft start feature	Yes
Trigger lock-on button	Yes
Motor-over-pad design	Yes
Externally accessible brushes	Yes
Weight	4.4 lbs
Dimensions	8-1/4" x 2-3/4" x 7-1/2"

Features

• Lightweight design for easy handling and reduced operator fatigue
• Variable speed control for matching the speed to the application
• Soft start feature for reduced risk of kickback
• Trigger lock-on button for continuous operation
• Motor-over-pad design for better balance and control
• Externally accessible brushes for easy maintenance

What's in the box

• Makita GV7000C disc sander
• 7-inch sanding disc (80 grit)
• Rubber pad
• Side handle
• Sanding lock nut
• Wrench (17mm and 28mm)

The Makita GV7000C is a versatile and powerful disc sander that is ideal for a variety of sanding applications. It is lightweight and easy to handle, and the variable speed control allows you to match the speed to the task at hand. The soft start feature helps to prevent kickback, and the motor-over-pad design provides better balance and control. The GV7000C is a great choice for professional and DIY woodworkers, as well as hobbyists.

Here are some additional tips for using the Makita GV7000C:

• Always wear safety glasses when using a disc sander.
• Make sure the sander is properly grounded.
• Use the correct type and grit of sanding disc for the job.
• Start with a low speed and gradually increase as needed.
• Be careful not to overload the sander.
• Allow the sander to cool down after use.

With proper care and maintenance, the Makita GV7000C will provide years of reliable service.

Makita GV7000C Compare with Similar Item

a table comparing the Makita GV7000C with some similar items:

Feature	Makita GV7000C	Bosch ROS20VSC	DeWalt DW745
Sanding disc size	7"	6.5"	6.5"
No load speed	2,500-4,700 RPM	2,800-7,500 RPM	1,700-3,100 RPM
Dust collection port	Yes	Yes	No
Weight	4.4 lbs.	5.2 lbs.	7.8 lbs.
Price	$149	$199	$129

As you can see, the Makita GV7000C is the lightest and has the lowest price of the three. It also has a variable speed control, which allows you to adjust the speed to the specific task you are working on. The Bosch ROS20VSC has the highest no load speed, making it ideal for sanding large areas quickly. The DeWalt DW745 has a dust collection port, which can help to keep your work area clean.

Ultimately, the best vertical disc sander for you will depend on your specific needs and budget. If you are looking for a lightweight and affordable sander with variable speed control, the Makita GV7000C is a great option. If you need a sander with a high no load speed, the Bosch ROS20VSC is a good choice. And if you want a sander with a dust collection port, the DeWalt DW745 is a good option.

Here are some additional pros and cons of each sander:

Makita GV7000C

Pros:

• Lightweight
• Affordable
• Variable speed control
• Soft start feature
• Dust extraction port (optional)

Cons:

• No dust collection port included
• Lower no load speed than some other models

Bosch ROS20VSC

Pros:

• High no load speed
• Dust collection port
• Soft start feature
• Durable construction

Cons:

• Heavier than some other models
• More expensive than some other models

DeWalt DW745

Pros:

• Dust collection port
• Durable construction
• Powerful motor

Cons:

• Heavier than some other models
• Not as lightweight as the Makita GV7000C
• No variable speed control

Makita GV7000C Pros/Cons and My Thought

The Makita GV7000C is a 7-inch random orbital sander that is known for its power, durability, and ease of use. It features a powerful motor that delivers up to 14,000 orbits per minute, making it ideal for sanding large areas quickly and easily. The sander also has a durable construction that can withstand the rigors of professional use. In addition, the GV7000C features a comfortable grip and a dust collection system that helps to keep your work area clean.

Here are some of the pros and cons of the Makita GV7000C:

Pros:

• Powerful motor delivers up to 14,000 orbits per minute
• Durable construction can withstand professional use
• Comfortable grip
• Dust collection system keeps work area clean
• Wide variety of sanding discs available

Cons:

• Can be a bit heavy for some users
• Dust collection system is not perfect
• Pricey

Here are some user reviews of the Makita GV7000C:

• Positive review: "This sander is a beast! It's powerful, durable, and easy to use. I've used it on a variety of projects, and it's always done a great job. The dust collection system is also really good, which is a huge plus. I would definitely recommend this sander to anyone who is looking for a high-quality tool."
• Negative review: "This sander is a bit too heavy for me, and the dust collection system isn't perfect. However, it's still a powerful and durable tool, and I would recommend it to anyone who is looking for a high-quality sander."

Overall, the Makita GV7000C is a great sander for anyone who needs a powerful and durable tool for professional use. It is a bit pricey, but it is worth the investment for serious woodworkers.

Here are my thoughts on the Makita GV7000C:

I think the Makita GV7000C is a great sander. It is powerful, durable, and easy to use. I especially like the dust collection system, which helps to keep my work area clean. I would definitely recommend this sander to anyone who is looking for a high-quality tool for professional use.

Here are some additional thoughts:

• The GV7000C is a bit heavy, but this is to be expected given its power and durability.
• The dust collection system is not perfect, but it is still better than many other sanders on the market.
• The price of the GV7000C is a bit high, but it is worth the investment for serious woodworkers.

Overall, I think the Makita GV7000C is a great sander. It is powerful, durable, easy to use, and has a good dust collection system. I would definitely recommend it to anyone who is looking for a high-quality tool for professional use.

Makita GV7000C Where To Buy

Here are some places where you can buy the Makita GV7000C and spare parts:

• Makita: You can buy the sander directly from Makita's website. They have a wide selection of spare parts available as well.
• Walmart: Walmart is another good option for buying the sander. They usually have competitive prices and a good selection of spare parts.
• Amazon: Amazon is a great place to find all sorts of tools and equipment, including the Makita GV7000C. They often have the best prices and a wide variety of spare parts available.
• Best Buy: Best Buy is a good option if you're looking for a physical store to buy the sander from. They usually have a good selection of Makita tools and equipment, and they also carry some spare parts.
• Lowes: Lowes is another good option for buying the sander from a physical store. They usually have a good selection of Makita tools and equipment, and they also carry some spare parts.
• eBay: eBay is a great place to find used tools and equipment, including the Makita GV7000C. You can often find good deals on used tools on eBay, but be sure to inspect the item carefully before you buy it.

I hope this helps!

Makita GV7000C Problems and Solutions

Sure. Here are some common issues and problems with the Makita GV7000C and their solutions:

• The tool won't turn on. This is usually caused by a faulty switch or a loose power cord. To check the switch, unplug the tool and use a multimeter to test the continuity between the two terminals. If there is no continuity, the switch will need to be replaced. To check the power cord, unplug the tool and inspect the cord for any breaks or fraying. If the cord is damaged, it will need to be replaced.
• The tool is overheating. This is usually caused by using the tool for too long at a high setting or by not allowing the tool to cool down properly between uses. To prevent the tool from overheating, use it on a lower setting and allow it to cool down for a few minutes before using it again.
• The tool is making a strange noise. This could be caused by a number of things, such as a loose bearing, a worn belt, or a damaged motor. If you hear a strange noise coming from the tool, stop using it immediately and have it serviced by a qualified technician.
• The tool is not vibrating properly. This could be caused by a loose or damaged armature, a worn belt, or a clogged air filter. To check the armature, remove the tool from the housing and inspect it for any loose or damaged parts. If you find any damage, the armature will need to be replaced. To check the belt, remove it from the tool and inspect it for any cracks or tears. If the belt is damaged, it will need to be replaced. To check the air filter, remove it from the tool and inspect it for any dirt or debris. If the air filter is clogged, it will need to be cleaned or replaced.

Here are some additional tips for preventing problems with your Makita GV7000C:

• Use the tool for the intended purpose.
• Use the correct accessories for the job.
• Inspect the tool regularly for any signs of wear or damage.
• Keep the tool clean and free of debris.
• Store the tool in a cool, dry place.

By following these tips, you can help to ensure that your Makita GV7000C provides you with years of trouble-free service.

Makita GV7000C Manual

Makita GV7000C Manual

Safety Information

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
• The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
• Work area safety
  • Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Electrical safety
  • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
  • Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Personal safety
  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
  • Wear personal protective equipment. Always wear eye protection when using a power tool. Dust mask, non-slip safety shoes, hard hat, hearing protection and gloves are also recommended.
  • Avoid accidental starting. Ensure the switch is in the "off" position before plugging in.
  • Remove adjusting keys and wrenches before turning on the power tool. A wrench or key left attached to a rotating part of the power tool may cause injury.
  • Do not overreach. Keep proper footing and balance at all times.
  • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
  • Do not operate a power tool in a dangerous environment. Do not use a power tool in wet or damp locations or expose it to rain.
• Power tool use and care
  • Do not force the power tool. Use the correct power tool for the job.
  • Do not use the power tool if the switch does not turn it on and off properly. Have the power tool repaired by a qualified electrician.
  • Disconnect the plug from the power source before making any adjustments, changing accessories or storing the power tool.
  • Store power tools out of the reach of children and other untrained persons.
• Maintenance and servicing
  • Have your power tool serviced by a qualified electrician after striking a nail or other object.
  • Have your power tool serviced by a qualified electrician if the power cord or plug is damaged.
  • Have your power tool serviced by a qualified electrician if the power tool is not working properly.

Before Use

• Read the instruction manual carefully before using the power tool.
• Make sure the power tool is properly assembled and adjusted before use.
• Check the power cord for any damage before use.
• Do not use the power tool if the power cord is damaged.
• Use the correct type and size of abrasive disc for the job.
• Do not use the power tool if the abrasive disc is cracked or damaged.
• Inspect the power tool regularly for signs of wear or damage.
• Replace any damaged parts immediately.

Troubleshooting

• The power tool does not turn on.
  • Check the power cord for any damage.
  • Make sure the switch is in the "on" position.
  • Have the power tool serviced by a qualified electrician if the problem persists.
• The power tool vibrates excessively.
  • Check the abrasive disc for any damage.
  • Make sure the power tool is properly assembled.
  • Have the power tool serviced by a qualified electrician if the problem persists.
• The power tool is not sanding evenly.
  • Check the abrasive disc for any damage.
  • Adjust the speed of the power tool.
  • Have the power tool serviced by a qualified electrician if the problem persists.

Maintenance

• Clean the power tool after each use.
• Use a damp cloth to wipe off any dust or debris.
• Do not use any harsh chemicals or solvents to clean the power tool.
• Store the power tool in a cool, dry place.
• Keep the power tool out of the reach of children.

**W